您的位置: 标准下载 » 国内标准 » GB 国标 »

GB/T 19567.2-2004 苏云金芽胞杆菌悬浮剂

作者:标准资料网 时间:2024-05-12 03:48:54  浏览:9841   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:苏云金芽胞杆菌悬浮剂
英文名称:Bacillus thuringgiensis suspension concentrate
中标分类: 化工 >> 化肥、农药 >> 农药
ICS分类: 农业 >> 杀虫剂和其他农用化工产品 >> 杀虫剂
发布部门:中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会
发布日期:2004-06-22
实施日期:2004-12-01
首发日期:2004-06-22
作废日期:1900-01-01
主管部门:农业部
提出单位:中华人民共和国农业部
归口单位:中华人民共和国农业部
起草单位:农业部农药检定所、华中农业大学微生物农药国家工程研究中心、湖北省生物农药工程研究中心
起草人:姜辉、喻子牛、陈守文、王开梅、王晓军、吴新平、顾宝根
出版社:中国标准出版社
出版日期:2004-12-01
页数:16开, 页数:14, 字数:22千字
书号:155066.1-21759
适用范围

本标准规定了苏云金芽胞杆菌悬浮剂的要求、试验方法以及标志、标签、包装、贮运。本标准适用于由用于防治鳞翅目害虫的苏云金芽胞杆菌原粉和助剂制成的苏云金芽胞杆菌悬浮剂。

前言

没有内容

目录

没有内容

引用标准

下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
GB/T125。极限数值的表示方法和判定方法
GB/T1600-2001农药水分测定方法
GB/T1601农药pH值的测定方法
GB/T1604商品农药验收规则
GB/T1605-2001商品农药采样方法
GB3796农药包装通则
GB/T16150-1995农药粉剂、可湿性粉剂细度测定方法
GB/丁5451-2001农药可湿性粉剂润湿性测定方法

所属分类: 化工 化肥 农药 农药 农业 杀虫剂和其他农用化工产品 杀虫剂
下载地址: 点击此处下载
【英文标准名称】:Testingoffibreopticelements;determinationofattenuationofopticalfibres
【原文标准名称】:光纤元件的检验.第1部分:光纤的衰减测定
【标准号】:DIN58141-1-1989
【标准状态】:作废
【国别】:德国
【发布日期】:1989-06
【实施或试行日期】:
【发布单位】:德国标准化学会(DE-DIN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:波的性质和现象;阻尼(波);波导;纤维光学;光波导;光学;试验;试验设备
【英文主题词】:optics;wavepropertiesandphenomena;testing;damping;fibreoptics;opticalwaveguides;testequipment;waveguides
【摘要】:Thisstandardspecifiesamethodforthedeterminationofattenuationofopticalfibres.
【中国标准分类号】:M33
【国际标准分类号】:37_020
【页数】:3P.;A4
【正文语种】:德语


Product Code:SAE J390
Title:Dual Dimensioning
Issuing Committee:Technical Standards Board
Scope:This document establishes a uniform method of combining inch-pound units and metric units of measure on the same engineering drawing. In this document 'metric units' means the International System of Units (abbreviated SI) as described in SAE J 916. Herein is guidance for converting from one system to the other while maintaining functional interchangeability.This document covers a dual dimensioning practice that provides both U.S. Customary inch-pound units and SI metric units for all dimensions on the field of drawing. The scope does not include the 'chart method'聴whereby drawings are dimensioned only in SI units聴with conversions to inch-pound units provided in chart form (usually computer generated) on the drawing. Further information on the chart method is found in SAE Handbook Supplement J1066, 'Recommended Guidelines for Company Metrication Programs in the Metalworking Industry.' The purpose of this document is to provide an authoritative guide for uniform application of dual dimensioning on engineering drawings. SAE recognizes that a decision regarding preparation of engineering drawings during metric transition is an individual judgement based on needs and circumstances. While providing this information, SAE takes no official position concerning dual dimensioning. Issuance of this publication should not be construed as advocacy.